40809 Media Handler MDH: Please remove plate detected on unload table [<I/O name>] Trendsetter_400/800 Trendsetter_400/800_ContinuousLoad Trendsetter_400/800_Autoloader Trendsetter_NEWS Trendsetter_Series_4 A plate has been detected on the unload table, and must be removed. This could occur during initialization. The vacuum reading may be above threshold, or the entry/exit sensor(s) may read true. Use the <<table>> command to display the sensor readings and the vacuum level. The vacuum sensor name is AI_UnloadVacuum. The exit sensor names are AL_SensorTableExitAway and AL_SensorTableExitHome (for TS NEWS only). The entry sensor names are AL_SensorTableEntryAway and AL_SensorTableEntryHome (for TS NEWS only). It is possible to bypass these sensors if necessary. If possible, remove the plate from the unload table. Call the Response Centre for assistance if necessary. Select RESUME or MEDIA REMOVED to continue. This error is reported. Plate left on table when machine was reset Incorrect vacuum reading Faulty sensors I/O name - This is the standard firmware name of the sensor that indicates a plate on the table. 06-MAR-2002 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:31 2008 PST